Salty seadog
Space Cadet...(3rd Class...)
my god you dispense sound advice.
Sink p trap ( ubend) problems
- Thread starter cyberknight
- Start date
Page may contain affiliate links. Please see terms for details.
slowmotion
Quite dreadful
- Location
- lost somewhere
Sod off nobber! I'm not that old!
Last edited:
Salty seadog
Space Cadet...(3rd Class...)
Profpointy
Legendary Member
One hint - there are two different sizes of pipe and fittings which appear the same size. On type is for gluing and the other is push fit. It is possible to mount the too-small type fitting in a lathe and bore out about 1.5mm so it fits the other kind of pipe - satisfying, yes, but not a good use of time.
And I've done the pouring the dirty water into the sink I've just disconnected as well - just after thinking "how can anyone be ao stupid as to so that"
And I've done the pouring the dirty water into the sink I've just disconnected as well - just after thinking "how can anyone be ao stupid as to so that"
D
Deleted member 26715
Guest
Not only that you can also find that different suppliers of 40mm is different sizes, Screwfix & Wickes don't mate up very well, both claim to be 40mm but one goes in the other but not the other way around. I tend to smear all joints with clear silicon sealer & leave or 24 hours, make it a little more difficult to undo later, but don't intend to undo
Twice!
