Tea?

[classic33]

Flavoured beers or ciders?
an abomination in my eyes.....

Just been in M&B (backwards) and YTea is in 210 boxes...
It's to pay for yon bird in security seeking out dodgy biscuit thieves

Baseball to watch at some point today..
just back from my pint and Scottish one..and other stuff..
Might do some garden stuff soon, might I said..

And to yer delicate taste buds?

We're getting one of them relocating to the town centre. A move of less than 200 yards from their current location.
Still seeing the 240 boxes. And it's them all that are doing it, not just the odd ones.
Said dodgy biscuit thief needs to eat summat to improve her memory.

Back on the catchup then...
Brekkie... what sort of other stuff. New foot cushion for when yer in catchup mode, more printing supplies...
Well, tomorrow is supposed to be reight wet n'windy for your end. Suppose it'd be best thought about being done today.

 

[Bobby Mhor]

And to yer delicate taste buds?

We're getting one of them relocating to the town centre. A move of less than 200 yards from their current location.
Still seeing the 240 boxes. And it's them all that are doing it, not just the odd ones.
Said dodgy biscuit thief needs to eat summat to improve her memory.

Back on the catchup then...
Brekkie... what sort of other stuff. New foot cushion for when yer in catchup mode, more printing supplies...
Well, tomorrow is supposed to be reight wet n'windy for your end. Suppose it'd be best thought about being done today.

Cider is apple not Berry or otherwise.....
Beer they can play about with BUT not pour moi....

Printing ?, fingers, toes etc crossed as now 16 hours into this 'print', at least if this 'part' prints ok, I will continue with the rest
Supplies are from the big river place.....

I painted a couple of fence sections this afternoon, so I can hopefully transform these; there are still quite a few to do. Possible shedding for a few hours tomorrow, then come home and take a rough look at what I want to do with today's painted sections.
No rain here today, a bit breezy the noo, rain is due anytime, the Mutt Off says.

Had a call from fuel mob, asking if I was happy to confirm my complaint has been sorted to my satisfaction....
I don't think my possible quip 'Life's a gas' might not be understood
Suppertime...
Dark'n'Stormy first

 

[classic33]

Cider is apple not Berry or otherwise.....
Beer they can play about with BUT not pour moi....

Printing ?, fingers, toes etc crossed as now 16 hours into this 'print', at least if this 'part' prints ok, I will continue with the rest
Supplies are from the big river place.....

I painted a couple of fence sections this afternoon, so I can hopefully transform these; there are still quite a few to do. Possible shedding for a few hours tomorrow, then come home and take a rough look at what I want to do with today's painted sections.
No rain here today, a bit breezy the noo, rain is due anytime, the Mutt Off says.

Had a call from fuel mob, asking if I was happy to confirm my complaint has been sorted to my satisfaction....
I don't think my possible quip 'Life's a gas' might not be understood
Suppertime...
Dark'n'Stormy first

You don't like pear cider then. But yer right, no "hint of" anything other than what were intended to be in it from the start.
And that should include beers, as that "hint of" something tends to push the price up by more than what were added.

Another "Wow" moment in the offing...
You certainly seem to be doing more with this than with the previous one. Almost as though it were growing on you, printed piece by printed piece...
Nowt you bought today then.

Bob's been busy...
You finished cleaning up that chair yet. Or have you still some finer bits to do.
Forget the rough look, smooth as a babies bottom is the in thing these days.
Non here either, yet! There's still time as it's coming in up the west coast of Ireland. Yellow Alert from 1400 hrs 'til 2300 for stormy weather.

Was it?
I always like it when they say they want honest answers, then don't like it when you give them.
Hope you were honest in yer answers.
Anything nice fer supper?
Where's that one brewed then, can't say I've come across it before.

 

[classic33]

It's on its way!

 

[Bobby Mhor]

Good morning
I haven't decided what today will bring.
I'll surprise myself once fed...

 

[classic33]

Good morning
I haven't decided what today will bring.
I'll surprise myself once fed...

Owdo
Wait for Today to surprise you, save money.
Getting fed, most important...

 

[Bobby Mhor]

You don't like pear cider then. But yer right, no "hint of" anything other than what were intended to be in it from the start.
And that should include beers, as that "hint of" something tends to push the price up by more than what were added.

Another "Wow" moment in the offing...
You certainly seem to be doing more with this than with the previous one. Almost as though it were growing on you, printed piece by printed piece...
Nowt you bought today then.

Bob's been busy...
You finished cleaning up that chair yet. Or have you still some finer bits to do.
Forget the rough look, smooth as a babies bottom is the in thing these days.
Non here either, yet! There's still time as it's coming in up the west coast of Ireland. Yellow Alert from 1400 hrs 'til 2300 for stormy weather.

Was it?
I always like it when they say they want honest answers, then don't like it when you give them.
Hope you were honest in yer answers.
Anything nice fer supper?
Where's that one brewed then, can't say I've come across it before.

View attachment 775014
It's on its way!

Pear cider is not bad....
Too many ale makers (or craft brewers) tending to push the envelope..
Just give me a clean, crisp fruit-free cider, ale, pilsner or occasional IPA.
Chilled, preferably...

The storm..
Will it fizzle out before it hits the land of Scots? we'll see.

3 am start for pt 2 of main section...
It says 20 hours for it, but it does change as it (hopefully) prints.
Part 1 finished just before midnight so we'll give it 19 and a half hours. I've photos, but if pt 2 prints, I'll upload a couple.

Honesty is the best policy....

Owdo
Wait for Today to surprise you, save money.
Getting fed, most important...

Save money?
I'm married...

 

[classic33]

Pear cider is not bad....
Too many ale makers (or craft brewers) tending to push the envelope..
Just give me a clean, crisp fruit-free cider, ale, pilsner or occasional IPA.
Chilled, preferably...

The storm..
Will it fizzle out before it hits the land of Scots? we'll see.

3 am start for pt 2 of main section...
It says 20 hours for it, but it does change as it (hopefully) prints.
Part 1 finished just before midnight so we'll give it 19 and a half hours. I've photos, but if pt 2 prints, I'll upload a couple.

Honesty is the best policy....


Save money?
I'm married...

So you'd not turn it down if offered it.
Ay, just to make something no-one else has, and then charge more for it.
Guinness!
You're not one of these that prefer/drink their cold ones at room temperature....

Might do, but moving NE you'll have it for slightly longer if you get it.

And you got up to start the printing process off?
An all day printing session. You up to an all day session still.
After ten hours and something went wrong I'd not be pleased. Twenty and it not coming out right, that'd be it.

May be, but it's not always well received when asked for.

There's ways and means
Excuses...

 

[Bobby Mhor]

So you'd not turn it down if offered it.
Ay, just to make something no-one else has, and then charge more for it.
Guinness!
You're not one of these that prefer/drink their cold ones at room temperature....

Might do, but moving NE you'll have it for slightly longer if you get it.

And you got up to start the printing process off?
An all day printing session. You up to an all day session still.
After ten hours and something went wrong I'd not be pleased. Twenty and it not coming out right, that'd be it.

May be, but it's not always well received when asked for.

There's ways and means
Excuses...

Would enjoy a glass of pear cider, of course.
I'd a couple of bottles of (localish) Red Berry cider,
bit too berryish TBH

Aye, I've a couple of failures,
just life and a learning curve....
I'm printing these off, and if they all print okay, the bloke I'm doing it for can tweak and build it...
I tried 'tree' supports this time around as a trial, so far no problem, but can add a fair bit to printing time..
The extra time is because I'm laying down a thinner layer than the normal .2.......

Did only a couple of hours at the Shed..

Nothing planned, but got a lead for a wooden toy, so maybe start at some point.
I just did a bit of floor tidying as well as asking questions

Back home, ETA print ? 22.00 (it'll change)

 

[classic33]

Would enjoy a glass of pear cider, of course.
I'd a couple of bottles of (localish) Red Berry cider,
bit too berryish TBH

Aye, I've a couple of failures,
just life and a learning curve....
I'm printing these off, and if they all print okay, the bloke I'm doing it for can tweak and build it...
I tried 'tree' supports this time around as a trial, so far no problem, but can add a fair bit to printing time..
The extra time is because I'm laying down a thinner layer than the normal .2.......

Did only a couple of hours at the Shed..

Nothing planned, but got a lead for a wooden toy, so maybe start at some point.
I just did a bit of floor tidying as well as asking questions

Back home, ETA print ? 22.00 (it'll change)

Would love a glass but none to hand.
Red berry cider, after all you said about it being pure as well.
Any is too much..

There'll always be failures. No failures would mean you were doing summat wrong.
They're not spare parts for yerssen then! If they don't print okay, you start again...
Could they have been printed without the supports, reducing the printing time.
Putting less down takes longer.

How'd yer chair turn out?

Wooden be for Toodles by any chance.
General Dogsbody, asking question. Any answers given...

Sat down, feet up, awaiting the printing finishing presumably.

 

[Bobby Mhor]

Would love a glass but none to hand.
Red berry cider, after all you said about it being pure as well.
Any is too much..

There'll always be failures. No failures would mean you were doing summat wrong.
They're not spare parts for yerssen then! If they don't print okay, you start again...
Could they have been printed without the supports, reducing the printing time.
Putting less down takes longer.

How'd yer chair turn out?

Wooden be for Toodles by any chance.
General Dogsbody, asking question. Any answers given...

Sat down, feet up, awaiting the printing finishing presumably.

Red Berry was a gift,
I gave the other bottle to my son-in-law who raved about it...

Here we go.

Inner Cylinder

Outer Cylinder

Inner one had an angled gap, Outer one had lugs, 8 of (where each support attaches to the main body), 'tree' supports in case you ask.
18 smaller pieces to print now....
Anything that overhangs needs a support. see the bottom left where the rim sticks out, find the tree supports much easier, so worth the effort, it was the .1 layer height instead of the usual .2, which extended the time more, I assume it is something to do with ??????

 

[classic33]

Red Berry was a gift,
I gave the other bottle to my son-in-law who raved about it...

Never look a gift horse in the mouth. And, when applicable sharing is good for you.

Here we go.
View attachment 775134

View attachment 775135
Inner Cylinder

Outer Cylinder
View attachment 775137

View attachment 775138
Inner one had an angled gap, Outer one had lugs, 8 of (where each support attaches to the main body), 'tree' supports in case you ask.
18 smaller pieces to print now....
Anything that overhangs needs a support. see the bottom left where the rim sticks out, find the tree supports much easier, so worth the effort, it was the .1 layer height instead of the usual .2, which extended the time more, I assume it is something to do with ??????

They parts for a vacuum cleaner, that can't be bought now?

The print time shorter than first predicted, by the looks of things. Two main parts now done and yer working on the smaller pieces?

How tall a piece can you print with yer current setup?

 

[Bobby Mhor]

Good morning
Just got in from bringing the bins and the heavens opened
Think it could be wet today again

 

[classic33]

Good morning
Just got in from bringing the bins and the heavens opened
Think it could be wet today again

Owdo
Bring them anything/anywhere nice, before the heavens opened.
You'll not have to water yer plants at least.

 

[Bobby Mhor]

Never look a gift horse in the mouth. And, when applicable sharing is good for you.

They parts for a vacuum cleaner, that can't be bought now?

The print time shorter than first predicted, by the looks of things. Two main parts now done and yer working on the smaller pieces?

How tall a piece can you print with yer current setup?

Something called a Cryptex....easier just googled
I thought the last parts were smaller bits, nope, I've a fair bit of printing to do yet, I might be finished sometime tomorrow.....................maybe
I'll see if I can cut the time down on this part I'm printing....
I don't see the bloke until Friday so hopefully I'll have it all done, hopefully

The base is 220 mm x 220 mm but may be 200 mm without checking.
I can't do 220 x 220 mm size..
I must have a shuffty

They say 220 x 220 x 250 mm..
I'd be more comfortable with, say, 200 x 200 x 220 mm.

Off to decide today's plan..
Outer Rings all day