Tea?

[classic33]

It'd scared me...
It would be like evil sounding wailing, local rags would be full of Bigfoot 'heard' in the area..
or Aliens knowing the area we live in..wooooooooooooooooohoooooooooooooooooooo

Thought you were scared of nowt!
Not the wail of the Banshee, keeping watch.
We have 5c and slowly falling,
I'd go with the aliens(area) over Bigfoot. No recent sightings of Bigfoot either.

sunny, blue skies and everywhere was white with JFrost early AM...
It fell to minus 2.9c during the night between mid of night and the AM of 2...

Had to throw on a shirt of Tee to head out and see Nursey....while Mrs M picked up the Toodles Gang.
I had left a print going when I was out, I had used the newish plate bed and everything really stuck to it, I meant stuck, could be the rapid cooling today of the PLA..
Anyhow, back on with the worn plant bed and no problem this time.
Four pins to do yet...

Overcast and it dropped a fair bit more during the night, skies cleared apparently letting it drop. We'd the wind of snow, but no snow, early on. No snow since either, and they promised us as well.

Hope you'd more than the shirt of Tee on when you presented yerself for inspection.
Thought you were "off" now until next year?
Maybe they're keeping an eye on you as you keep an eye on them...
Now I know this may sound daft, but I thought those plate beds were non-stick by design. Lucky you kept the old one to hand.
That's easy do, walk round in yer bare feet. You'll have them found in next to no time. And you have the advantage of one dodgy foot already.

 

[classic33]

Fine afternoon
10 hrs until 2026, jeez.
I'll raise a glass tomorrow, as I really don't celebrate HNY...
Find it a bore now....

I do wish all you fine people all the very best for 2026...
and the best of health and fortune hence...

Dry here at least.
Owdo
Less than eight hours left of 2025. Can we skip 2026 and go straight to 2027 instead.
I find raising a glass the best way of supping from it.

And you folk North o'Border always did it better.
The same to Thee and Thine, and the "Toodle Twins".

 

[Blue]

Just popped in to say "A happy New Year to thee and thine".

I'll be drinking in the new year later, while watching Jools Holland's Hootenanny.

 

[classic33]

Just popped in to say "A happy New Year to thee and thine".

I'll be drinking in the new year later, while watching Jools Holland's Hootenanny.

Nice to see you around.

All the best in the New Year to thee and thine

 

[Bobby Mhor]

Just popped in to say "A happy New Year to thee and thine".

I'll be drinking in the new year later, while watching Jools Holland's Hootenanny.

Hello to you
Regards from all here at 48....

 

[Bobby Mhor]

Thought you were scared of nowt!
Not the wail of the Banshee, keeping watch.
We have 5c and slowly falling,
I'd go with the aliens(area) over Bigfoot. No recent sightings of Bigfoot either.

Overcast and it dropped a fair bit more during the night, skies cleared apparently letting it drop. We'd the wind of snow, but no snow, early on. No snow since either, and they promised us as well.

Hope you'd more than the shirt of Tee on when you presented yerself for inspection.
Thought you were "off" now until next year?
Maybe they're keeping an eye on you as you keep an eye on them...
Now I know this may sound daft, but I thought those plate beds were non-stick by design. Lucky you kept the old one to hand.
That's easy do, walk round in yer bare feet. You'll have them found in next to no time. And you have the advantage of one dodgy foot already.

You haven't met the Terror Two..
they really are good..

4.9c just now..
I'd my usual shorts and a big furry jumper,
I looked like a blue Teddy....
Last appointment for the year..
A card full from Jan....and a hossie one.

This I have never seen anything so well stuck.
I need an enclosure for the winter....
Everything I was doing is now done..
I'll do a self-levelling later and do some examples tomorrow.
It's the inconsistency of the difference of the 'slicing (creation of the G Code file which the printer needs) file between upgrades but it's free.
4.5c, oh boy, it's dropping..
I have a plate bed which is, Texture PIA..
Must look into it....

I'm I'm giving myself the rest of the year off, I deserve it.
Catch up next year..
All the very for 2026.....

 

[classic33]

You haven't met the Terror Two..
they really are good..

4.9c just now..
I'd my usual shorts and a big furry jumper,
I looked like a blue Teddy....
Last appointment for the year..
A card full from Jan....and a hossie one.

This I have never seen anything so well stuck.
I need an enclosure for the winter....
Everything I was doing is now done..
I'll do a self-levelling later and do some examples tomorrow.
It's the inconsistency of the difference of the 'slicing (creation of the G Code file which the printer needs) file between upgrades but it's free.
4.5c, oh boy, it's dropping..
I have a plate bed which is, Texture PIA..
Must look into it....

I'm I'm giving myself the rest of the year off, I deserve it.
Catch up next year..
All the very for 2026.....

That's true enough, nor have I heard the three of you singing together...

Just above freezing here at present, and it's gonna get colder if the skies clear.
Don't see how you could fit another one in this year.
A Steiff!
Best o'luck with the hossie appointment, meet some new nursies there... Explain everything, again, to them.

It could be the weather, gets blamed for everything these days, why not yer printing.
And if you wanted it to stick...
A spare plate!

I think you deserve the rest of the year off. You could have sung it in along with the Toodle Twins.
All the best to thee and thine, and see you next year...