Vapour barrier
- Thread starter Tripster
- Start date
Page may contain affiliate links. Please see terms for details.
OldShep
Veteran
- Location
- South West Scotland
I wouldnt worry and I’d be very surprised if it’s the only bit that has a nick in. I had to puncture mine for every wire feed to socket.
It was a stupid error on my part. I thought wall was just boarded over brick so drill through wood into brick and put clug on wall for bine mount. It wasnt so ended up having to use Grip its to hold it as they need Raw plug and into batton or brick
Ming the Merciless
There is no mercy
- Location
- Inside my skull
Thought this would be about vapour barrier clothing for cold conditions.
Sorry
rockyroller
Guru
- Location
- 20 miles northwest of Boston, MA
probably fine but 1st thought was using a tiny bit of that expanding foam insulation that comes in a can with a straw. insert straw in hole where the puncture is & give it a tiny shot, just the tiniest of shots. that stuff can be messy. at least then you will have made an effort & will sleep at night 
I never thought of that. Would need to go get some and remove clug from wall. I will go with the ‘it will be fine’ and drink a beer to help with sleepprobably fine but 1st thought was using a tiny bit of that expanding foam insulation that comes in a can with a straw. insert straw in hole where the puncture is & give it a tiny shot, just the tiniest of shots. that stuff can be messy. at least then you will have made an effort & will sleep at night
rockyroller
Guru
- Location
- 20 miles northwest of Boston, MA
a far better plan!
Garage is boarded out, plyboard x2 sheets on batons then gap and vapour barrier. Whats best way to mount stuff to this when I need something able to take some weight ? I put Rawplugs in and they just spin and screw wont tighten up, grip its are better on plasterboard not wood and just a couple of screws is not sufficient
bikingdad90
Guru
https://www.screwfix.com/p/easyfix-...vf2o0S8CPuIvS5jJuRhoCp0cQAvD_BwE&gclsrc=aw.ds something like this? I believe this type of fixing splays out into a star shape and grips the back of the plasterboard or plywood?
This video shows the screw in the wall.
View: https://m.youtube.com/watch?v=LZqCZfdvhbg
This video shows the screw in the wall.
View: https://m.youtube.com/watch?v=LZqCZfdvhbg
Bazzer
Setting the controls for the heart of the sun.
- Location
- On the edge of reality
bikingdad90
Guru
I believe the reusable version of spring clips is these?
https://www.screwfix.com/p/gripit-p...7F_BX5H4AJQbwjKYrhBoCjKYQAvD_BwE&gclsrc=aw.ds
Bazzer
Setting the controls for the heart of the sun.
- Location
- On the edge of reality
Not seen those before. 👍
Brilliant on plasterboard, I used them to mount pictures, tv, all sorts and even have a little undercutting tool for double thickness plasterboard to allow wings to open. Not good for plyboard as when you tap them in they have four grooves on front face that cut into plaster. I think an old fella designed them in his garage, when on dragons den and got funding then gave the company and idea to his grandson as he never wanted the cash just to leave something for his grandson
rockyroller
Guru
- Location
- 20 miles northwest of Boston, MA
find the wooden studs & drill into them. sometimes ppl will mount a board to the wall using the studs, then mount stuff to that board
