numbnuts
Squire
- Location
- Gone over the hill and far away
I fettled some mince pies 48 of the little buggers 
What Have You Fettled Today?
- Thread starter threebikesmcginty
- Start date
Page may contain affiliate links. Please see terms for details.
derrick
The Glue that binds us together.
- Location
- On the edge of London
I opened a parcel from the postman, it was my new cassette does that count, can't fit it yet as i am waiting for a new chain.
paulw1969
Ridley rider
- Location
- Long Eaton, Notts.
fitted some SKS blumels to the new Merida....not as easy when you have disc brakes. Got round it by using two light fittings which my LBS showed me how to doctor to fit the front stays........worked quite well.
Diggs
Veteran
- Location
- Billericay, Essex
Finally got the Frankenbike put together from the base of my 1994 mtb and bits I had lying around.
smokeysmoo
Legendary Member
- Location
- Bolton, not very far from Nob End
Fitted 105 SPD-SL pedals to my lads fixed gear, and changed his tyres for something a little better than the stock Kenda tyres, (although TBH he's never had a flat on them).
Fitted my cassette to my winter back wheel for the CAAD, but need new rim tape before I put the tyres on.
Tested my new Joe Blow Track pump, seems OK but I don't know why people rave about them. My 5 year old Decathlon track pump did the job equally well, and will now reside at work, just in case.
Fitted my cassette to my winter back wheel for the CAAD, but need new rim tape before I put the tyres on.
Tested my new Joe Blow Track pump, seems OK but I don't know why people rave about them. My 5 year old Decathlon track pump did the job equally well, and will now reside at work, just in case.
youngoldbloke
The older I get, the faster I used to be ...
Fitted Tortec Tour Ultralite rack on the winter bike. Hope Christmas will bring a rack bag, and thus relief to bulging jersey pockets.
smokeysmoo
Legendary Member
- Location
- Bolton, not very far from Nob End
Oi, it's Mr Christmas to you
HLaB
Marie Attoinette Fan
Finally got round to repatching that tube as I had to patch another
cyberknight
As long as I breathe, I attack.
- Location
- Land of confusion
new brake pads, re trued the front wheel and noticed some play in the cones so its a regrea of the hubs and check tightness when i am off over x mas.
paulw1969
Ridley rider
- Location
- Long Eaton, Notts.
Yet more fetting today....hopefully that will be it for a while...adjusted blumels for a better fit.....flipped stem for a lower reach....measured road bike leg length and found i was 10mm out on the hybrid so adjusted and will see how i get on. Moved brakes and gear levers towards stem due to addition of bar ends......much more comfy now.
Leaway2
Lycrist
- Location
- Manchester (Sale)
The rear hub seized. Fitted a new wheel from "stock". Swapped over the cassette and adjusted the gears and brakes.
Stripping down the hub is Saturdays job. Is it difficult? (Specialized Secteur)
Stripping down the hub is Saturdays job. Is it difficult? (Specialized Secteur)
fossyant
Ride It Like You Stole It!
- Location
- South Manchester
I'll be re-attaching my light bracket to the pannier rack tonight, one of the cable ties snapped on the way in this morning, and the thing was hanging off with two lights on it. 
It's basically a plastic pipe so the light brackets can mount to the rack. Fortunately there are two more lights on the back of the bike.
It's basically a plastic pipe so the light brackets can mount to the rack. Fortunately there are two more lights on the back of the bike.
fossyant
Ride It Like You Stole It!
- Location
- South Manchester
Lights re-attached with cable ties, fettled son's front light bracket (after he complained it keeps coming loose) and secured adjusting lever with a cable tie. Good these cable ties. 
