Punkawallah
Veteran
‘Spares and extras, m’boy! Spares & extras’ :-)
What Have You Fettled Today?
- Thread starter threebikesmcginty
- Start date
Page may contain affiliate links. Please see terms for details.
sevenfourate
Devotee of OCD
- Location
- Lowestoft, Suffolk
YOU know the drill 😉
Cycling Badger
Active Member
Changed cleats - been needing to do it for ages and kept forgetting - until about 10 minutes into a ride.
Started swapping out slicks on XC for something a little more knobbly. Tubeless - bit of a faff.
First wheel cleaned and dry seated.
Second wheel cleaned and now drying. Unfortunately, the tape peeled. There seems to be an oil that weeps out of the Rene Herse tyres. This oil got under the tape. Spent an age cleaning off the residual dried sealant. Anyway, hub now drying and ready for retaping tomorrow.
Started swapping out slicks on XC for something a little more knobbly. Tubeless - bit of a faff.
First wheel cleaned and dry seated.
Second wheel cleaned and now drying. Unfortunately, the tape peeled. There seems to be an oil that weeps out of the Rene Herse tyres. This oil got under the tape. Spent an age cleaning off the residual dried sealant. Anyway, hub now drying and ready for retaping tomorrow.
Punkawallah
Veteran
Swapped out the Chinese 25mm tyres on the Colnago for Vittiria Rubino 28mm. Took it for a quick run between rains and the difference was night and day.
Italian bike and tyres (in name). So obviously going to be better.
Punkawallah
Veteran
It came with 90’s wheels, and I had fun mentioning to an Italian fan that my Galaxy on Weinmann hubs rolled further than the Colnago on Campag hubs. Then I put on period Mavics (same tyres) and it didn’t
Have to see next year how it does with the new tyres.
Elybazza61
Legendary Member
Just sorted the dynamo wiring on the Fairlight Faran ,got the front light and Igaro charger cables routed through the fork leg ,still have a bundle of cables tie-wrapped near the light as I have to leave slack when I want to put the front rack on.
At some point I'll look in to fitting some connectors if possible.
Also popped a fresh tube in the front tyre as it had a slow puncture, no TUP tubes left so put normal butyl one in; did try it tubeless but the tyre wouldn't pop on (think it needs re-taping).
At some point I'll look in to fitting some connectors if possible.
Also popped a fresh tube in the front tyre as it had a slow puncture, no TUP tubes left so put normal butyl one in; did try it tubeless but the tyre wouldn't pop on (think it needs re-taping).
Cycling Badger
Active Member
The dark art of running dynamo cables - never seems optimal; always some form of compromise.
Cycling Badger
Active Member
Finished setting up XC bike wheels.
Even after a good clean, including wipe with isopropyl alcohol, had trouble getting tape to bind. Gave it two wraps then fought with tyre for about 30 minutes. Left inflated with inner tube for the afternoon to bed tape. Removing tube and setting up tubeless was faff free.
Job done, productive evening.
Even after a good clean, including wipe with isopropyl alcohol, had trouble getting tape to bind. Gave it two wraps then fought with tyre for about 30 minutes. Left inflated with inner tube for the afternoon to bed tape. Removing tube and setting up tubeless was faff free.
Job done, productive evening.
Punkawallah
Veteran
Wrapped around a tube like ivy, or taped to one?
