What Have You Fettled Today?

Page may contain affiliate links. Please see terms for details.
Maybe not the best thing to do, as the forecast for tomorrow morning is now to be dry. Then maybe with 'sod's law' its the best way to guarantee it is dry. But I added the front mud guard to the roadified gravel bike. There's ample clearance for road tyres but I'll probably have to remove it if I want to use the gravel tyres and I don't know how well it'll hold but.
20261114_194544.jpg
 

Gwylan

Guru
Location
All at sea⛵
Another puncture Second one in as many weeks
That was the first one since the Green Marathons went on.
Nasty shards of metal or bits of small nails.

Hopefully ready for an early morning wander to keep fit session. That gives me an hour's exercise and 20km cycle.
I'm unsupervised tomorrow so might include a 'spoons visit. Thereby defeating all the healthy intentions of the exercise.
 

Elybazza61

Legendary Member
Checked over the stayer after yesterdays tumble and found the left shifter not moving the mech up to the big ring (it worked yesterday on the way home after re-setting the Di2 ) ;had a nose around and saw a loose bit of plastic so removed tape and undid shifter then fished out the tiny bit of plastic and hey presto the shifter works! Think the plastic is just from some of the cover behind the paddles.

Tape and shifter back on and now the brake isn't returning so all off again :banghead: ,brake now working again :wacko: ,put it all back together and everything is fine :unsure:.

Will have to give it a short test to make sure before going on the longer ride I was planning later this week. (and may put the GP5000's back on).
 

Elybazza61

Legendary Member
Did a quick bar swap on the BH's Cotic but looks like it will stay with drops for the moment.

Also had a nose at the tyres on the Stayer OG and noticed the treads getting a bit low on the rear so decided that as I would be checking sealant etc I'd put the new set I had and keep the others for spare/emergency replacements would also give me an excuse to give the wheels a good clean.

Forgot how tight the Pirellis were to get on the DT Swiss rims but at least they popped on straight away and also fitted new Juice lube valves; sealant in after waiting to see if there was any air loss and now back on the bike, will see how they are in the morning.

While I was at it checked the pads and gave them a scrub and re-fitted so all good there.
 
Top Bottom