Is this chainring wornout?

[JackStraw]

Hi All,
Is my chainring worn out?
I have a jumping/skipping chain under load or uphill on some gears.
The chain and cassette has been replaced but this didn't resolve the issue, has helped slightly.
I found that clean chain with little to no lube is much less likely to skip. I mean it's pretty obvious but just wanted to add.

Thanks

 

[EckyH]

I think it's worn out, because the teeth - especially in the first picture - are shark fin shaped already.
So the effective distance between two adjacent teeth is bigger than the distance between the rollers of a new chain which leads to the skipping you described.

E.

 

[Paulus]

I would concur with @EckyH , the teeth are shark finned shaped. The chainring/s are toast and need replacing.

 

[Webbo2]

I ‘m not sure you can tell how worn it is given how dirty it is. Bloody he’ll give it a clean.

 

[Jenkins]

Another in agreement with @EckyH
For comparison from ones I changed a few years ago. Worn on the left which look like the one you've pictured against new on the right and you can see the difference

 

[MontyVeda]

I ‘m not sure you can tell how worn it is given how dirty it is. Bloody he’ll give it a clean.

despite the dirt... the wear is absolutely obvious.