Next Project: 2016 Boardman FS Team

[KuroSan]

Narrowed the selection down a little, will use Crysh for the main downtube stencil and I'm kinda leaning more towards using Aiiight for the model lettering, as even though it's only available in lowercase, it actually looks better imo!

Finally got the filler sanded and rubbed down the putty primer so i could re-shoot etching primer on the exposed frame from sanding, did the primer earlier and will redo the putty primer tomorrow. All things going well I'll be ready for the basecoat at the end of the week!

 

[KuroSan]

Basecoat is down! Unfortunately a combination of random gusts of wind and Halfords rattle can meant there's one or two small splatters that'll need to be sanded out before I do a final coat tomorrow, nothing huge though and no runs which is always a good thing!
I did notice a lot more small scuffs etc i missed during sanding the primer, but you can't really see them unless you're really up close, for the most part though the surface is nice and smooth. I reckon it's going to look really good once it's all finished and gets a clearcoat in the spring.