Rear gears jumping

Spiderweb

Not So Special One
Location
North Yorkshire
The indexing sounds a bit out. Turn the barrel adjuster that goes into the rear mech, as you look at the back of the bike turn anti clockwise for more cable tension, clockwise for less. Doesn’t take a lot of adjustment, Just try 1/4 turn increments until the indexing is spot on.
 
OP
M

Mick54

Active Member
Location
Northumberland
The indexing sounds a bit out. Turn the barrel adjuster that goes into the rear mech, as you look at the back of the bike turn anti clockwise for more cable tension, clockwise for less. Doesn’t take a lot of adjustment, Just try 1/4 turn increments until the indexing is spot on.
Appreciated 👍
 
Top Bottom