'Rebuild' Onto A New Frame

Page may contain affiliate links. Please see terms for details.
Due to the imminent demise/failure of my CGR 'work-bike' I wanted another frame that would (at the very least) take '28' section tyres & mudguards
So, after a few readers offered suggestions, I had a trip to Harrogate yesterday, with my daughter

After careful consideration, between 2 frames, & influenced by the £110 difference between the pair........... I am a Yorkshireman..........

I bought a Spa Cycles ‘Aubisque’ frame/forks
I also purchased;
- a head-set (they faced the head-tube/pressed it in for me, as I went off to the local Co-Op, for a sandwich)
- new mudguards, as the present pair are split, & held together with cable-ties (& onto the stay-mounts too!)
- disc-brake adapters to allow for the difference in mounts


Everything else was transferred from the CGR, barring;
1. bottom-bracket (old one was seized into the CGR, bought another this morning, from 'Evans at Xscape')
2. front derailleur (‘borrowed’, from my 1994 Dyna-Tech 755Ti, that’s hung up in the garage, as the seat-tube is the same diameter as the Spa)
3. the STI ‘stops’/converters (also from the Dyna-Tech)

All that’s left to do now, is;
1. cut down the new mudguard-stays to an appropriate length
2. transfer all of my lights onto it
3. test-ride


79790A01-F564-444C-A039-AEC59CEE946F.jpeg


A9AD6272-84A2-4456-A298-045DB4A646EE.jpeg



The Elan 725, looked very nice indeed, in the metallic bronze, but it was £485
https://spacycles.co.uk/m11b0s143p4590/SPA-CYCLES-Elan-725-Frame-and-Forks

The Abisque was £375
https://spacycles.co.uk/m11b0s143p3874/SPA-CYCLES-Aubisque-Frameset

Like I wrote earlier................ Yorkshireman!!!:okay:
 
Last edited:

jowwy

Can't spell, Can't Punctuate....Sue Me
nice looking machine that
 

T4tomo

Legendary Member
Very smart and a good practical do it all bike..... but I'd have splashed the £110 extra for metallic copper, and I'm also a Yorkshireman.

I'd have also given it some new and not white bar tape.:okay:
 

ColinJ

Puzzle game procrastinator!
I like that bike too!

Are you going to trim and cap the mudguard stays now? :whistle:
 
I like that bike too!

Are you going to trim and cap the mudguard stays now? :whistle:
Yes, after a 'trial-ride' (including some woodland)

‘Summer House’
https://www.geograph.org.uk/photo/2091017
597A6A34-24BF-4A0D-B02B-D8A4D2181ACF.jpeg



Toasting it
I drank it, didn’t smash it
B2C20A53-22B4-4648-ACA0-055E8CC006CB.jpeg

It feels fine, an immediately comfortable riding position. despite just guessing what height to put the saddle, based on how far it came against my hips (about 1/4" adjusttment needed)

The Dremel & discs were used for an easier cut of the stays
 
Last edited:
Top Bottom