Biff600
Veteran
Now I get your avatar
Oh no, that pertains to my previous job of gunnery and drill instructor
Show us what you're doing at work today
- Thread starter Justinslow
- Start date
Page may contain affiliate links. Please see terms for details.
Oh no, that pertains to my previous job of gunnery and drill instructor
Joey Shabadoo
My pronouns are "He", "Him" and "buggerlugs"
Why did I just stand straighter, dammit!
Dave 123
Legendary Member
- Location
- Cambridgeshire alps
30 window boxes done this afternoon, I'll put them out in 2 weeks
gbb
Legendary Member
- Location
- Peterborough
Servicing pallet shuttles. They pick up and move pallets automatically in racking.
Check / replace buffers, sensors, aerials (theyre controlled via a transmitter) emergency stops that often get broken, grease the worm shaft bearings, blow out any debris. All straight forward, 2 new E stops fitted.
smokeysmoo
Legendary Member
- Location
- Bolton, not very far from Nob End
I forgot to post this last week while dealing with failed sewage pumps at a gym in Wrexham.
Scroll down for pic but DISCRETION ADVISED
Scroll down for pic but DISCRETION ADVISED
Dave 123
Legendary Member
- Location
- Cambridgeshire alps
We have a temporary kitchen on New Court Lawn at present. This morning I’ve planted a herb garden. All plants grown by me from seed
Glow worm
Legendary Member
- Location
- Near Newmarket
A dull desk day here, but I'm nearly at item 6 on the to do list 
You might be interested in what I do at work.
Glow worm
Legendary Member
- Location
- Near Newmarket
Nice!
I'm mapping a lot of footpaths at the moment, so most of it is done on foot. A little low tech, but at least I get to go for some nice walks!
Nice!
I'm mapping a lot of footpaths at the moment, so most of it is done on foot. A little low tech, but at least I get to go for some nice walks!
For a proof of concept once I spent 2 weeks in the Harz National Park on foot and mountain bike building an off road product. It was bliss and I was paid very well for it.
Datum2
Über Member
- Location
- Huntingdonshire
Refurbishing the plough with some new mould boards and other earth wearing parts. Job slowed down as the parts company delivered the wrong nuts and bolts so probably get finished next week. Its not a rush job just on going maintenance and repairs.
keithmac
Guru
Are you all sitting down 
.
CBR 900, service and strip clean and setup carbs (been stood 4 years). Ran like a dream afterwards and enjoyed working on it.
2015! CB500, should have been an hours job for chain and sprockets but front sprocket seized onto output shaft. Had to get some heat into it with our "stick" welder while loading it up with the hydraulic puller..
ZX6 valve clearances (all 16 out of spec!), lot easier to a loose engine though!.
GTS 300 User Rectifier replacement, could have made it more accessible..
Pan European for seals, had to pull the front end out in one lump and get the gas torch on the legs as the seals were seized into the legs.
Yamaha MT09, fairing and radiator off plus clean air crankcase breathers off to access blood spark plugs, then another hour just to get to air filter....
GTS 125 fuel pump replacement, had to drop the engine off it's mounts to pull fuel tank down enough to replace pump.
Triumph America (2015).
Multiple wiring faults and Canbus failure, still on with it as I've had to strip the complete loom finding broken wirs and crimps as I go, lovely..
.CBR 900, service and strip clean and setup carbs (been stood 4 years). Ran like a dream afterwards and enjoyed working on it.
2015! CB500, should have been an hours job for chain and sprockets but front sprocket seized onto output shaft. Had to get some heat into it with our "stick" welder while loading it up with the hydraulic puller..
ZX6 valve clearances (all 16 out of spec!), lot easier to a loose engine though!.
GTS 300 User Rectifier replacement, could have made it more accessible..
Pan European for seals, had to pull the front end out in one lump and get the gas torch on the legs as the seals were seized into the legs.
Yamaha MT09, fairing and radiator off plus clean air crankcase breathers off to access blood spark plugs, then another hour just to get to air filter....
GTS 125 fuel pump replacement, had to drop the engine off it's mounts to pull fuel tank down enough to replace pump.
Triumph America (2015).
Multiple wiring faults and Canbus failure, still on with it as I've had to strip the complete loom finding broken wirs and crimps as I go, lovely..
Last edited:
woodbutcher
Veteran
- Location
- S W France
Are you all sitting down
CBR 900, service and strip clean and setup carbs (been stood 4 years). Ran like a dream afterwards and enjoyed working on it.
View attachment 408714 View attachment 408718 View attachment 408719
2015! CB500, should have been an hours job for chain and sprockets but front sprocket seized onto output shaft. Had to get some heat into it with our "stick" welder while loading it up with the hydraulic puller..
View attachment 408717
ZX6 valve clearances (all 16 out of spec!), lot easier to a loose engine though!.
View attachment 408720
GTS 300 User Rectifier replacement, could have made it more accessible..
View attachment 408716
Pan European for seals, had to pull the front end out in one lump and get the gas torch on the legs as the seals were seized into the legs.
Are you all sitting down
Are you all sitting down
CBR 900, service and strip clean and setup carbs (been stood 4 years). Ran like a dream afterwards and enjoyed working on it.
View attachment 408714 View attachment 408718 View attachment 408719
2015! CB500, should have been an hours job for chain and sprockets but front sprocket seized onto output shaft. Had to get some heat into it with our "stick" welder while loading it up with the hydraulic puller..
Hell man you're worth your weight in gold, don't suppose you would relocate to France and service my Ducati 748s
View attachment 408717
ZX6 valve clearances (all 16 out of spec!), lot easier to a loose engine though!.
View attachment 408720
GTS 300 User Rectifier replacement, could have made it more accessible..
View attachment 408716
Pan European for seals, had to pull the front end out in one lump and get the gas torch on the legs as the seals were seized into the legs.
View attachment 408710
Yamaha MT09, fairing and radiator off plus clean air crankcase breathers off to access blood spark plugs, then another hour just to get to air filter....
View attachment 408711
GTS 125 fuel pump replacement, had to drop the engine off it's mounts to pull fuel tank down enough to replace pump.
View attachment 408715
Triumph America (2015).
Multiple wiring faults and Canbus failure, still on with it as I've had to strip the complete loom finding broken wirs and crimps as I go, lovely..
View attachment 408712
CBR 900, service and strip clean and setup carbs (been stood 4 years). Ran like a dream afterwards and enjoyed working on it.
View attachment 408714 View attachment 408718 View attachment 408719
2015! CB500, should have been an hours job for chain and sprockets but front sprocket seized onto output shaft. Had to get some heat into it with our "stick" welder while loading it up with the hydraulic puller..
View attachment 408717
ZX6 valve clearances (all 16 out of spec!), lot easier to a loose engine though!.
View attachment 408720
GTS 300 User Rectifier replacement, could have made it more accessible..
View attachment 408716
Pan European for seals, had to pull the front end out in one lump and get the gas torch on the legs as the seals were seized into the legs.
View attachment 408710
Yamaha MT09, fairing and radiator off plus clean air crankcase breathers off to access blood spark plugs, then another hour just to get to air filter....
View attachment 408711
GTS 125 fuel pump replacement, had to drop the engine off it's mounts to pull fuel tank down enough to replace pump.
View attachment 408715
Triumph America (2015).
Multiple wiring faults and Canbus failure, still on with it as I've had to strip the complete loom finding broken wirs and crimps as I go, lovely..
View attachment 408712
View attachment 408710
Yamaha MT09, fairing and radiator off plus clean air crankcase breathers off to access blood spark plugs, then another hour just to get to air filter....
View attachment 408711
GTS 125 fuel pump replacement, had to drop the engine off it's mounts to pull fuel tank down enough to replace pump.
View attachment 408715
Triumph America (2015).
Multiple wiring faults and Canbus failure, still on with it as I've had to strip the complete loom finding broken wirs and crimps as I go, lovely..
View attachment 408712
