I have just replaced a broken sram front derailleur (x4) with a newer one(x5). My issue is that the new derailleur has to be fixed in a way that the outer plate of the cage is quite a lot higher than the biggest front cog, all the videos that i have watched on youtube(park tool,gcn etc) tell me that the outer cage should be within a few mm's above the biggest cog. If i do this the inner part of the cage touches the middle front cog and stalls the motion, the inner cage plate is a lot lower than the outer cage plate. Does it matter? Is this something particular to sram? Some advice would be much appreciated. I hope i have explained myself well, if not i can add more information. Thanks.