I fitted a little outside floodlight bar to the side this afternoon. It's above the sliding door and below the awning so should come in rather handy. I tapped in to the 12V feed I'd run through for the interior lights, job's a goodun 
I used sikaflex to seal the 2 screw holes and the hole for the wires so hopefully there'll be no leaks. The wiring and switch position will be sorted when I do the interior, I've just taped the switch up next to the interior light dimmer for now.
I've been leaving the fridge in the back as it comes in handy sometimes but its been sliding around so I also made a quick bracket to hold it in place. Seems to fit snugly, I'll find out if it works tomorrow when I take the van to a local gravel/xc sportive I'm taking part in
Unless the weather is biblical of course 
I had wanted to sort the window tint today but its windy and rainy, not the ideal conditions for that job

I used sikaflex to seal the 2 screw holes and the hole for the wires so hopefully there'll be no leaks. The wiring and switch position will be sorted when I do the interior, I've just taped the switch up next to the interior light dimmer for now.
I've been leaving the fridge in the back as it comes in handy sometimes but its been sliding around so I also made a quick bracket to hold it in place. Seems to fit snugly, I'll find out if it works tomorrow when I take the van to a local gravel/xc sportive I'm taking part in


I had wanted to sort the window tint today but its windy and rainy, not the ideal conditions for that job
