Wobbly cassette - why?

Page may contain affiliate links. Please see terms for details.

Ajax Bay

Guru
Location
East Devon
With cassette fitted (no spacer), lock ring spun on in 3 revs, i.e. bottomed out.
Fitted the spacer and cassette, but there's not enough of the spline exposed for the smallest cog to bite into. i.e. the spacer is too big. I need a 1mm spacer.

An alternative approach might be to use one of these (with the 1.85mm spacer), which has a couple more mm of thread. Jeopardy is that:
  • the 11sp sprocket isn't engaged with the freehub splines
  • the 11sp sprocket is real close to the drop out.
Am not recommending this but found it in my explorations.
https://uk.edco.ch/products/lockring-ten-eleven
 

fossyant

Ride It Like You Stole It!
Location
South Manchester
It's like bloody Coronation Street this saga. :whistle: Been going on almost as long !
 
OP
OP
Mazz

Mazz

Senior Member
Location
Leicester
1mm spacer on order now, so stay tuned for another exciting episode...
Capture.PNG
 

ColinJ

Puzzle game procrastinator!
Stick it on, confirm that the problem has been fixed, and let us get on with our lives! :laugh:
 

wafter

I like steel bikes and I cannot lie..
Location
Oxford
Great news!

However, where life in the before-times once offered anticipation, excitement, intrigue... in the wake of this development I now feel only the cold vacuum of the void - its unfathomably black chasm yawing open toward the infinite; as if to devour my very soul like the jaws of some gigantic, inescapable, mythical sea-creature the mere existance of which no mortal man has lived to recount..
 
Last edited:
Top Bottom