berty bassett
Legendary Member
- Location
- I'boro
when is the first test ride ?2 sheets 800*600mm 18mm thick ply(might need bigger depending on turbo)
4* pillow bearings 20mm
https://www.bearingboys.co.uk/Pillow-Blocks/UCP204-Medway-20mm-Pillow-Block-Bearing-1778-p
20mm bar(local blacksmith)
bolts, nuts and washers. selection of wood screws.
Off cuts of 10mm thick ply and 5mm ply.
edit, I've added some 5mm spacers to take up the free wobble and place tennis balls under tension
I used 10mm bolts with countersunk Allen heads 45-50mm in length