Tea?

Page may contain affiliate links. Please see terms for details.

classic33

Leg End Member
Two different type of bases...
But the fittings were the same,
One was going to be a straight morse key, and the other a micro bits one, Google it
The print of all the extras printed okay without supports luck enough.
Bloke arrives at 15.00 to pick up so I better go get ready...
Technically the quads can work well but if used willy nilly in all weathers...
Just back from the W but almost -3 the overnight low....
Fair enough, explains a few things.
You printed the whole morse key, aside from contacts.
Lucky you, don't think you'd have time to start from scratch given the time he's due.
You laying on a spread for him, showing how you did it all. Leaving the printer to itself.
Used willy nilly, whatever the weather. New toys for some of them...
Olde haunts again... Supposed to be colder tonight, with warmer weather returning next week.
 

Bobby Mhor

Legendary Member
Location
Behind You
Dash it...Missed the morning by a few minutes :hello:
Mrs M then needed me to put a couple of prints up, no rest for the wicked on such as sunny afternoon.
It's from my last 'don't tell anybody cross-border raid' ssh
Enjoy your day
 

Bobby Mhor

Legendary Member
Location
Behind You
Fair enough, explains a few things.
You printed the whole morse key, aside from contacts.
Lucky you, don't think you'd have time to start from scratch given the time he's due.
You laying on a spread for him, showing how you did it all. Leaving the printer to itself.
Used willy nilly, whatever the weather. New toys for some of them...
Olde haunts again... Supposed to be colder tonight, with warmer weather returning next week.

Correctomundo...
They are prototypes (now I know)
So improvements will be made so I can print the finished article, I might have one of the micro bits so I can at least practice Morse Code...
I'll see...
Thought it best so we could chat without interruption.
Getting positive feedback so all is well...

6.4c just now, so heading in the right direction, Hefty thick fog in the Forth Valley earlier...
Off to wait on a phone back...
 

classic33

Leg End Member
Dash it...Missed the morning by a few minutes :hello:
Mrs M then needed me to put a couple of prints up, no rest for the wicked on such as sunny afternoon.
It's from my last 'don't tell anybody cross-border raid' ssh
Enjoy your day
Owdo
By a few minutes!
You were hanging yer own work or summat that took her fancy whilst in a shop. Sunny afternoon, which part of the country are you in?
Any good, in yer opinion, compared to your work. Check behind you before tapping out a reply...
I'll try, promise...
 

classic33

Leg End Member
Correctomundo...
They are prototypes (now I know)
So improvements will be made so I can print the finished article, I might have one of the micro bits so I can at least practice Morse Code...
I'll see...
Thought it best so we could chat without interruption.
Getting positive feedback so all is well...

6.4c just now, so heading in the right direction, Hefty thick fog in the Forth Valley earlier...
Off to wait on a phone back...
And you got the job of testing the printing...
Will it be you that makes the improvements to it. Gone rusty on the morse code front with all this near automated stuff?
Do it blindfolded...
Suppose the interruption is telling you tea's ready, and if you want any, get yerself down...
It's one thing I suppose...

Closer to double figures here, with some dressed for june-july complaining its cold.
Where's it bin?
 

Bobby Mhor

Legendary Member
Location
Behind You
Owdo
By a few minutes!
You were hanging yer own work or summat that took her fancy whilst in a shop. Sunny afternoon, which part of the country are you in?
Any good, in yer opinion, compared to your work. Check behind you before tapping out a reply...
I'll try, promise...
At the Towers....
Wet day tomorrow....forecast.
4.7C just now...
And you got the job of testing the printing...
Will it be you that makes the improvements to it. Gone rusty on the morse code front with all this near automated stuff?
Do it blindfolded...
Suppose the interruption is telling you tea's ready, and if you want any, get yerself down...
It's one thing I suppose...

Closer to double figures here, with some dressed for june-july complaining its cold.
Where's it bin?
Yep, I only print.
I did the 50% models to try out print settings, now in bin.
I'm baffled at amending files, I guess i could learn but I'll let others..
In 1989, I could send and receive up to 15 words per minute. I never sat the test. A pass was 12 wpm....
I seem to have lost all dah dit dahs from my memory.
 

classic33

Leg End Member
At the Towers....
Wet day tomorrow....forecast.
4.7C just now...
Yer own work then?
Damp here with a fog rolling in off the hills here...
More snow promised...
Slightly warmer, but not much...
Yep, I only print.
I did the 50% models to try out print settings, now in bin.
I'm baffled at amending files, I guess i could learn but I'll let others..
In 1989, I could send and receive up to 15 words per minute. I never sat the test. A pass was 12 wpm....
I seem to have lost all dah dit dahs from my memory.
Suppose he's missing summat?
50% model no good as a micro mini key...
I can understand you wanting to leave the amending to others, but if you don't try you'll never learn anything.
Quick enough not to have to bother taking the speed test.
So long as it's only yer dah dit dahs that you've lost.
 

classic33

Leg End Member
Well, relatively clear skies so far this morning seem to be ruling out the promised snow.
Currently sat at 1°C here, just about the coldest part of the early hours, can't see it getting much lower.
 

Bobby Mhor

Legendary Member
Location
Behind You
Good morning :hello:
Dismal, wet and depressing (that's just like me:laugh::laugh:) day outside..
Almost half inch of rain (in old money), 12.5 mm in new speak..
Stay dry and warm,
Est miserable....you get my drift, non?
 

Bobby Mhor

Legendary Member
Location
Behind You
Well, relatively clear skies so far this morning seem to be ruling out the promised snow.
Currently sat at 1°C here, just about the coldest part of the early hours, can't see it getting much lower.

Yer own work then?
Damp here with a fog rolling in off the hills here...
More snow promised...
Slightly warmer, but not much...

Suppose he's missing summat?
50% model no good as a micro mini key...
I can understand you wanting to leave the amending to others, but if you don't try you'll never learn anything.
Quick enough not to have to bother taking the speed test.
So long as it's only yer dah dit dahs that you've lost.

Funnily, he's got that idea now.
I'm about to go try another test (50% one) using another setting, which I should have YouTubed first.
I'll do that later.
I'd try to amend if it were mine, but leave it to those who know what they want.
I could get a good morse decoder so I could only need to send...

-... --- -...
 
Top Bottom