sram

Used but in fantastic condition. Post mount fit. Includes: Used pads - still have some life in them mounting bolts £35 with postage

As title, complete with inner and some sectionsof outer cable. These came with some other bits I bought but are surplus to requirements. They look lightly used; in clean, decent nick and were reputed to be working fine by the previous owner however are untested and sold as seen. The worst...

I've listed some bits for sale on Ebay, but will offer them for sale on here as well, but at my lowest offer price rather than the shown price over there Full pics are available on each of the listings or I can send them direct via here if needed. Firstly a pair of unused SRAM Powerglide...

These parts are from my Boardman e-bike as a result of changing the transmission for ratios that better suited me, after (so the motor data tells me!) just under 1,000 miles - so pretty much as new. SRAM Apex PG1130 - 11-42T Cassette (Retail at Tredz £71.99 - text from their listing)...

SRAM XG1-XD 10-42 11sp cassette (these cassettes are expensive!) Used, in good condition with not many miles - see pic for condition of the teeth. This was swapped out from a bike that was changed from 1x to a double with smaller cassette. £43 posted to a UK address - please PM if interested.

OK, probably all longshots but here goes: For me: - Planet X 45 Clincher Front Wheel only; i have the set, but the front one has damage to the carbon so not being used. Willing to pay. - SRAM Rival 10spd RH shifter; mine is sticking so a replacement would be ace. Willing to pay sensible cash...

I'm after upgrading my rim brake bike to Electronic gear shifting and it doesnt have the necessary fittings for Shimano Di2 so just on the off chance someone has the SRAM etap in a rim brake version they are looking to sell?

SRAM S Series 44T, 11 speed crankset, used but as new. The crankset was taken off an almost new bike that was changed to a double chainset. £40.00 posted to a UK address. Please PM if interested.

I know, highly specific, but the pinch bolt on my 2012 Boardman's rear mech has finally given up the ghost and the threads are gubbed. Looking for used etc. and posted at like £20 total at the most?

Orro Venturi STC Tailor Made Large Sram Force Etap Axs. Orro Venturi stc tailor made size large, this bike has been kept in immaculate condition and looks like it has just come out the shop. Has not been ridden a lot and I am selling it due to it being a bit small. This is a fantastic bike as...

Planet X Pro Carbon Sram Rival 22 Road Bike (Medium 53cm) VGC. Fantastic lightweight carbon road bike which perfectly balances speed, responsiveness and comfort. Excellent mechanical condition having had new chainrings only 1500 miles ago and a recent new chain and cassette; this bike has been...

In good clean condition, and perfect working order with jockeys spinning freely

Selling for a pal on my estate who doesn't do social media. He bought this bike new and has ridden it 3 times a year and not at all for the last 3 years. It's in great condition with barely a mark to the frame and in perfect working order with nothing needing doing now or any time soon. It's a...

£35 +PP

Does anyone have for sale new or used Sram GXP drive side external English threaded cups Thanks all

Left crank with spindle is brand new, never taken out of the packaging. Chain rings have light summer use, Strava tells me ~500km. Note that the drive side crank has its pedal thread stripped so is unusable. I'm unsure whether the spider separates from the crank arm, I can investigate if...

As above it came on a bike I bought but far too low gearing for me, so immediately swapped out for a bigger one, I don't think it had ever been used and looks in good condition. Pics to follow if needed.

The shifter is catching on the brake lever, I thought the pistons might be sticking so I lubricated them. No luck, could the problem be the gear cable. The unit is still shifting. Maybe the mechanism has just died. Any suggestions welcome.

hey guys an lassies, i fitted a new cassette and 9 spd chain to my ancient rock rider 540, this one to be exact https://www.bigbike-magazine.com/vtt-2015-btwin-rockrider-540 i believe i need a new middle chain ring as i get mad slipping with the new chain on my middle front ring which makes...

Sram force22 53/39 chainrings sram force22 short rear mech plus 11/26 cassette for sale very good condition £120

Seems this might be the electric groupset of choice for a while. Thought I read somewhere it had more batteries and took more charging than Di2 ?? Any user experience likes/dislikes / problems ?

My Boss has a Cannondale with 11 speed sram Apex. It never shifted properly, always had tendency to miss a gear then jump 2 sprockets. Recently it got unrideable. After a lot of faffing about I measured single click cable pulls. From 3.5 to 4.5 mm per click!!! Derailleur has play in all pins...

New bike, collected it from the Clitheroe branch at 1630hrs today ... Never had discs, carbon forks, through axles .... Set up tomorrow, Ride on Saturday morning ... God it’s lovely .... many thanks to Cyclescheme....

View: https://www.youtube.com/watch?v=i74B-9tj0sE

As title, looking for a SRAM Dual Drive hub and clickbox if anyone has one for sale? Cheers, Joe

After creaks and clicks, I removed the SRAM Rival crankset from my Cannodale to find the following wear: * The drive side on the right, where there is still black surface, is the least worn, with a smooth surface left to right and a width of about 5mm; the non-drive side on the left has a...

Hi. How thick is the overall cassette? Is it more than 40mm?

Hello! After a bit of advice, I think I've cracked it but I'm second guessing myself. I've recently purchased a new bike that has come with a SRAM SX crankset and what I believe to be a powerspline BB. The frame itself (A Kona Unit X) is advertised as having a 73mm dub BB. I'm replacing the...

The top 5 cogs are ok but the bottom 2/3 are worn out. I used it for the turbo but can’t put the watts out as the bottom cogs make the chain skip. Yours for the cost of postage.

Having trouble with the shifting on my CX/Gravel bike. Driving me nuts. Single ring setup, SRAM Force cranks, 38t ring, 11/36 cassette, Force 1 medium cage rear mech, Force shifters. Shifting up through the gears all works fine, however, when on the largest cog it won't shift down. Shifter...