Brompton seat height

Page may contain affiliate links. Please see terms for details.

simongt

Guru
Location
Norwich
There's a new gadget available to solve this problem. I'm going to get one next time I'm in the shop and give it a try. The hip level thing does work most of the time but sometimes I'm in a hurry and don't get the height quite right.
Wot - ? ! ' In a hurry' - on a Brompton - ? !:eek:
 

Sara_H

Guru
My Brompton seat tube is a bit slippy, so I have to get off and alter it every half an hour anyway.
 

simongt

Guru
Location
Norwich
That was an issue that both the good lady wife and I had with our Giant Halfway. We resolved that by replacing the quick release seat clamp with a 'proper' seat clamp requiring the user of a hex key. Before anyone comments, we both weigh about 70 kg., so it wasn't THAT causing the problem - !
BUT, neither of us have experience a sinking feeling with our Bromptons. It does state in the 'Book of Words' that the seat pin must be absolutely clean, as must the seat tube. Give said pin & tube a good rub down with a white spirit soaked cloth which should shift any traces of greasiness which may be the problem.^_^
My Brompton seat tube is a bit slippy, so I have to get off and alter it every half an hour anyway.
 

shouldbeinbed

Rollin' along
Location
Manchester way
My Brompton seat tube is a bit slippy, so I have to get off and alter it every half an hour anyway.
Not good, silly obvious 1st question - the clamp is tight enough isn't it?

I'd have the seatpost out and give it a serious cleaning and make sure the frame seat tube is properly clean inside too.

Might be worth checking with a couple of Brompton specialist LBS's that the frame and post are as they should after the road rage repairs.
 
Top Bottom