shimano

My google-fu has deserted me... I'm looking for a crank end bolt for a Shimano Alfine FC-S500 crank. It ISN'T the same as most of the other HT2 cranks which take an M20 end bolt, it's smaller than that... I'm after one in red alloy to match some other red alloy highlights on the bike, which, as...

I have Shimano RS805 calipers on my Giant Defy Advanced Pro 1. The brake pads are L02a which need replacing. Has anyone used alternative brake pads to the L02a or any suggestion where I can source compatible pads. At £15.95 (Wiggle price) for a set Shimano L02a they are taking the proverbial...

Shimano 6700 Ultegra brakes calipers with brand new pads. Used but in great condition other than the rear one that has rub marks on the underside from where it has rubbed on the mudguard, but these cannot be seen when the brake caliper is fitted to the bike. £50

Rare chainset - Ultegra Hollowtech II triple with 53/39/30 rings and 170mm crank arms. Cosmetically very good with no rub and just the normal marks from moderate use. The rings are used but still have plenty of life in them. £Sold

Gradually upgrading so for sale are: 105 5800 11sp **SOLD** perfect working order and levers very good - few scuffs to hood exactly shown in pics 105 5800 Rear mech (the elusive long cage!) Perfect working order - couple of light scratches **SOLD** 105 5800 front mech braze on £12.95 Perfect...

Shimano Sora FD-R3000 still for sale, still brand new with the chainring height guide sticker still on the cage. Bought with the intention of using it for a commuter build, but now surplus to requirements as have switched groupsets to Campagnolo. This is the new Sora front derailleur that will...

New Shimano Sora R3000 2x9 shifters for sale. Bought brand new from a seller who took it off their brand new bike. I've bought it with the intention of using it for a commuter build but have switched to Campagnolo instead so these shifters are surplus. No use at all from me, so still brand new...

On this morning’s ride, I discovered that my rear shifter wouldn’t change up - the small lever wasn’t “clicking” when pushed to the left. It would change down OK, but not up - which is why I found myself 10 miles from home, stuck in first gear :-( After a bit of wiggling the levers around, the...

Hey gang. Contemplating going a little upmarket from my microshift R8 setup that came with the bike either this summer, or for christmas. It ticks all the boxes (shiny, better, shimano), but is not that common to find as a groupset(especially with 175mm cranks), is the phobia of triples over...

Ultegra 11spd chainset 172.5 arms and 53/39 rings Used for short period and then swapped for compact. A few very very small marks from normal usage and one installation mark on inside of non-drive side crank near the pedal thread. Otherwise as new. Now on ebay

Perfect working order - had an easy life on a commuter. A few scuffs/signs of use in line with age/use Or 'chucked in' with any other item I have for sale

Crankset has been used once and come complete with 36t chainring (unused) But no chainring bolts £50 posted via paypal gift

So I just picked up a great bike on the second hand market, but want to immediately change the wheels, partly as the ones it has are awful, and partly because I'm 15 stone! Seen a solid handbuilt set on the local facebook marketplace (32 spoke front and rear. Miche Primato hubs, Pacenti SL23...

I ride with shimano spd sl on my road bike which i had fitted as part of a bike fit. I'm starting to ride more track and have to use look keo pedals that are on the hire bike. How does positioning of the two compare, i know the shimano cleat is bigger but i am wondering if i was to draw around...

New Shimano BB-UN53 bottom bracket with 107mm axle, for BSA threaded bottom bracket shell 73mm wide ( as found commonly on MTBs). This has been installed in a frame and fitted with cranks, but found to be too short for the purpose and removed again without ever being used. Note all metal cups on...

Having developed a fluid leak past the piston, I discovered it had a crack through it. Has anybody used the "fine quality" replacement pistons from China (metal). Loathe to buy a new caliper, if I can get away with it TIA

These are great carbon wheels. I have the older version on my best bike. 50mm deep sections with an Alu rim - so you don't have to worry about changing brake blocks etc - these are ready to go. I brought them to build up my next bike - but them employer joined scheme and I have decided to buy a...

Hi, I'm asking this for a friend - he has a Trek Cyclocross bike that is badly in need of new chain and cassette, possibly chain ring too. It's an 8 speed with triple chain ring Tiagra groupset. I can't seem to find old Tiagra 8 speed kit online, so would he be best off getting something...

As per the title, right hand 9 speed Shimano thumb shifter wanted. Cosmetic condition unimportant as long as mechanically ok. On fleabay atm they either seem to be in pairs, or LH side only (or SRAM). Thanks for looking.

Gone

Hi all, wanted to know if anyone knows the old Rotor 3D cranksets can be fitted with a Shimano road or MTB crank cap? This is the type I'm talking about. You fasten it with a 5mm (? not too sure) allen key rather than the Shimano crank cap tool. I just wanted to know if anyone knows if it's...

Are Shimano M520 SPD pedals all two sided?

Single sided in good condition £15 Posted

Used Shimano BR 561 (105 equivalent non-series) brakeset for sale, taken off a road bike that now has the 105 brakes from kernow_T on them. Brake pads still have much life in them (as shown in pics), and the whole calliper still moves smoothly and brakes perfectly. Asking for £20 posted for...

Hi there, Up for sale is my Black Aluminium Ribble, I'm unsure on the actual frame name, and have struggled to actually find it on the web, it looks like my 7005 frame but doesn't have any rack mounting points on the rear. Welcome any wisdom here.... Compact frame measuring 52cm, main reason...

This came with a bundle and apparently only been used on a turbo. 11 speed and 11 -25T - No Lock Ring but includes all intermediate 11s spacers Very clean and looks lightly used Sold

Anyone got any views on relative quality? I know that they are entirely compatible, at least up to 9 speed, which is all that bothers me. I have used SRAM 7 speed cassettes on a dual drive system (3x7) and they seemed somewhat shinier than Shimano's offerings at that price point. Not the most...

Convert your 10spd or cable disc CX bike to full 2x11spd Shimano hydraulic disc brake, 105 equivalent. What you get L&R shifters (ST-RS505) RS785 hydraulic callipers with good used pads 105/5800 long cage rear mech - black 105/5800 frame mount front mech - black 105/5800 11-32 11spd cassette...

Used crank arm set on Ebay. Ideal for someone who has chewed the splines up on a left arm after it came loose during a ride. Ebay listing HERE

As above. Cheers.