shimano

I am setting up a tourer ( this https://www.biketart.com/bikes-c1/frames-c33/ridgeback-panorama-deluxe-frameset-p12171) and having a nightmare getting my head around the gears. I am not a first timer, but also not an expert! Gear shifters are 9 speed Sora triple. I haven't got to the front...

Can anyone tell me how to install the cable, and get it adjusted on a Shimano C050 front mech please. The cable comes in from the top.

So, my bike is in need of a makeover. The rims are nearly shot. The right hand shifter (SRAM Apex) has a broken spring so it takes a bit of a nack to get it to work properly. The chainrings and cassette are nearing end of life. And the freehub has a problem. I've decided to go for a whole...

I have a pair of BR-RS405 front and rear hydraulic brake calipers for sale These are brand new with fitting kits and pads for 160mm rotor's I also have 2 hydraulic brake leavers that will work these brakes , these are used but unmarked as of my flat bar to drop convertion £60 posted Any...

I honestly don't understand the fixation by Shimano to do away with 12 and 13T bottom sprockets on their cassettes and insist that we buy an cassette with mainly a 11T as the last one? I mean, and lets be honest, how often do you use an 11T? Surely much better to have the ones in the middle...

I've found myself with a pair of each, will likely fit one and sell the other. Any views on which are better? Thanks, Paul.

Used, but in good condition. A few scuffs. Size 46, supplied with cleats fitted. £15 plus post Paypal or bank tx

Removed from recent purchase. Obvious heel wear, but very little wear on rings. 172.5mm. Missing the end cap. £40 plus post Paypal gift or bank tx

Brand new in pack, genuine Shimano cleats with fixings. Pair of lightly used ones also included. £5 plus post Paypal gift or bank tx

Used for 3000 miles. Very tiny mark on side, see 1st and 3rd pic, otherwise excellent. £25 plus post Paypal gift or bank Tx

Shimano M520 spd pedals and cleats - SOLD

https://www.7hundred.co.uk/12455/products/2013-felt-f6-carbon-acid-green.aspx https://www.7hundred.co.uk/12455/products/2013-felt-f6-carbon-acid-green.aspx Size 54 - see above link for full geo This frameset (although a 2013 model) was purchased new in 2015 and has covered less than 1000...

SOLD PENDING PAYMENT - IF ANYONE CAN REMIND ME HOW TO EDIT POST/THREAD TITLES PLEASE TELL ME BELOW Bought and never fitted. 105 5500 Octalink Triple 9 speed chainset. 170mm cranklength. 52/42/30T Silver For a BB5500 Bottom bracket £30 plus postage. If buying remote, paypal friends and...

Bought for a bike that's likely to be sold and past returns period. Absolutely brand new with booklet, spacer, QR skewers etc. Perfect winter/training/commuting wheel or as an upgrade on entry level own brand! http://www.chainreactioncycles.com/mobile/shimano-rs010-road-wheelset/rp-prod121528...

My road bike has 105 5700 groupset, it’s 5 years old and has done around 15,000 all weather miles. The front shifter is stiff and has been for a while. I changed the inner cable today and established that most of the friction causing the stiffness is within the shifter. I think the shifter needs...

Hi all. I have just come back from a mini tour of Wales, one of the issues I had during the tour was climbing with a fully loaded bike. The Pinnacle Arkose I ride has a compact twin with a 32t rear cassette. Whilst slogging and pushing up many a hill, I began to thin about fearing options. As...

Trying to source on of these, rare as hens teeth and mighty expensive for what is out there. Anyone know any retailers that might have one at a decent price? Has to be 53/39, 172.5

After coverting my Synapse 105 to flat bars I have for sale a Canondale dropbar with a set of Shimano 5800 11 speed shifters factory assembled. SHIFT LEVERS: Shimano 105, 11-speed HANDLEBAR: Cannondale C3 Compact, butted 6061 alloy TAPE: Cannondale Grip Bar Tape with gel, 3.5mm All in good...

After cycling for 8+ years, I have finally bitten the bullet and purchased some SPD pedals because of all the 'you'll never regret it' type anecdotes I have heard and read and seen. The ones I have bought are dual purpose so they're also flat on one side so I don't always have to clip in (when...

My giant TCR needs new bearings for the BB. Would I be correct in saying Shimano BB-RS500 press fit is fitted in to BB86 bikes. Would I also be correct in saying replacement bearings need to be 37x24x7 thanks Dennis

Pair of Shimano 4700 calipers - lightly used but in good condition ( no pads included). Would also swap for a pair of similar long drop calipers. £20 for both- postage included ( in the UK)

Hi all, I'm having some issues with the front derailleur on my new bike (Giant Contend SL 1). In the lowest gear (large back, smalll front) no matter what I try, the derailleur won't travel far enough inwards (towards the frame) to stop the chain rubbing against the plastic plate on the...

Tried to swap the chain on the wife's road bike last night, after multiple attempts to split the new HG 9spd chain to shorten it I gave up and went back to Evans where I bought it with the old chain to get them to split it, thinking I'll just pop their special link in and done. Tonight I've...

Anyone got some in good condition they would like to sell to me?

Hi In need of a second hand 9 speed Shimano crankset, double or triple, hollowtech for the winter ride. Compact or standard Anything with some life in it. Anything Shimano branded. Ebay has a few on this week again but they all seem to go over the £40 - £50 mark Not wanting to spend quite...

I have 2 5800 series rear mechs for sale, a short cage and a medium cage, they are both in good condition and have only seen light use. The short cage was removed to allow the use of the medium cage which has now been replaced by an ultegra version. The plastic barrel adjuster on the short cage...

5600 shifters, 5600 braze on front mech, 5700 rear mech. Sold Shifters have had plenty of use but are still fully functioning - will do double or triple - rear mech lightly used but with a bit of cosmetic damage and front mech very good.

Any has an old one spare? Cheers Ian

Perfect working order and just a few light marks associated with light use. Pads very light use so loads of life left. Postage included PayPal fees £1.50

Hello there. I have just changed the EVO386 BB on my bike to cure a click on pedalling. The bearings still seemed reasonably smooth but there were wear marks on the spindle on both the drive side and non drive side, not much but definitely a shiny mark where the spindle contacts the bearings...