crankset

My google-fu has deserted me... I'm looking for a crank end bolt for a Shimano Alfine FC-S500 crank. It ISN'T the same as most of the other HT2 cranks which take an M20 end bolt, it's smaller than that... I'm after one in red alloy to match some other red alloy highlights on the bike, which, as...

Currently: Bottom bracket : Shimano BB-ES50 68E BC1.37x24, L-R 113 Crankset: Shimano Alivio M430/M431 44/32/22 Struggling to find a replacement crankset. Closest I can find is :Shimano Acera FC-M3000 Octalink chainset, 40/30/22 This is "compatible with 118mm Octalink BB". Would this work if...

Crankset has been used once and come complete with 36t chainring (unused) But no chainring bolts £50 posted via paypal gift

*** Now found a taper crank, Mirage still available if you're interested** I've got an Ultratorque (not the Powertorque) Mirage crankset complete with decent bearings, bracket cups and fittings plus a pair of decent chainrings (can't remember if they're Campy, Stronglight or TA, but ho hum...

Little used this came off my 1996 Raleigh Pioneer which appeared to have gone up and down the road a couple of times before then being unused until I bought it in 2016. One ride and the crankset was switched for a much larger item. So this is a retro Shimano Hyperdrive Altus crankset, model...

Probably seen this before but took me a while to calibrate in my brain the use of a left hand crank for the US team at last weekend champs in the Womens Team Pursuit. http://www.bbc.co.uk/sport/cycling/43250664

Long story short - removed pedal & busted the thread on my left crank arm so now in market for replacement. Brand new one is €40 ish - I'd rather get a used one for much cheaper so will check ebay tonight. However if going new is the route I'd have to take, I'd rather buy a whole new crankset...

What do you people like silver or black? Am looking for a new crankset for my Canyon, at the moment I got the black and done about 7500 miles. I like the black and it cost about £90 and I can get a silver ones at £62 both 50/34. So what would you buy?

Hello, I had an accident ramming into a car (the car won) and although I came out badly bruised myself, the cycle is fine. OK I am lying. There was a stone that found its way in the seat, which is slightly uncomfortable. And then there is the bent pedal, which is more of an issue for me...

Morning all, I picked up a SH triban 3 with 650 wheels for the wife to use on the turbo (and to try to tempt her out on the road with me when the weather improves). It's like new, itlooks like it's never been outside, but there's a definite wobble on the chain rings which is causing me some...

never used.....50/34 with 170mm crankarms £60 posted via PayPal gift

Apologies in advance for the long post.... So... cycling along on the trails, and I realize it sounds like I have a can with a ball bearing in being rattled around whenever I pedal. In fact, it sounded so much like this, I stopped, removed the seatpost, turned it upside to shake it, half...

picked up a Merlin Axe which was advertised with a 105 5800 chainset. When it arrived I noticed it was actually a RS500 chainset. Merlin have offered to replace the chainset but considering this means spending £15 on a BB tool and not having use of the bike for a week or so (I still have my...

These are parts which were replaced when upgrading from a 3 speed BSR Sturmey hub Brommie to the 8 speed SA hub by means of the Kinetics conversion kit. I doubt if I had exceeded 300 miles before upgrading. I'm selling these as a complete 3 speed kit. The 3 speed kit consists of a standard rear...

Will this work? The backstory: I want to put a 50/39/30 triple on my wifes rohloff equipped trike in order to get very low gears but also high gears. Rohloff's seem to work best with 9 speed chains but there's not many 9 speed cranksets around anymore hence the question. btw Rohloff have told...

Very good used condition, usual scuffs from heel rub, plus the odd scrape on crank end. Only selling due to being a hill wimp and needing 50/34! If you ride mainly on the flat, and or have a 28 or above cassette, these will be ideal for you! £95 ono. weight around 646 grams

Great condition ultra light, BB30, weighs in at 610 all in (excluding BB which is not included). Great way to upgrade your groupset, ideal upgrade from FSA gossamer (790 grams for equivalent). Less than £1 per gram saved, and significant improvement in drivetrain performance and stiffness too...

Hi there, I have Sram Red 20 speed from 2011, and I want to change the crankset (for Alpine climbing). My current cranks are the original 2011 130 bcd 53/59. I've obtained a good as new set of Red Exogram 22 speed with 110bcd, 50/34, so should be ideal. Only thing is, the chainrings say only...

I have a holdsworth retro crankset for sale. I bought it from planet x and it was fitted to a bike then removed. It's 172.5 crank length with 48/34 chainring. It's for a square taper bb and all the details are on planet x website. Looking for £48 delivered

Sram x7 crankset - gxp BB 68/73 (not included) 39/26 170mm arms Its in nearly immaculate condition. Ideal for building a low geared road/tourer/cross or mtb £30 posted via paypal gift

I want to take the crank bearing out to check for wear etc. As it's a crap bike I do not want to spend much. The bottom crank looks as if it is like bikes I used to have in the 50's needing a 'C' spanner? to get it off. I used to have all of these tools but time has made them disappear. Anyway...

As I'm pedalling along on Old Reliable, I'm getting an irritating "click" from the crankset somewhere. It's a bit more pronounced when more effort is put on the pedals (e.g. up hills); it's not there when freewheeling; it seems to disappear in wet weather; it's not the chain, and it's not mech...

fsa vero compact chainset 50/34 170 mm arms with powerdrive BB 113 mm i believe 37 x 24t 68 mm width minimal usage , bought as replacement set off ebay ages ago but i realized that it wasnt compatible with hollowtech which is what i have now ( Doh ! ) £40 posted

I greased my chainset bolts and nuts today for the first time in an attempt to resolve a creak, I thought it was the bottom bracket, but evidently it was not. Taking the opportunity to properly clean the inner chainring I noticed both rings were past their best, not sure it is economical to...

The right-side crank on my trusty Spesh commuter snapped tonight as I was setting off at a roundabout (Sugino 52/42/30), and I wondered whether it would be better to replace the whole drivetrain, given the years of service I've had from it, or whether a new pair of cranks would be okay? I'm...