wheel

A Tacx Satori Smart trainer which comes with wheel holder and skewer. This was purchased as a customer return from Wiggle in January 2018. Looks like it wasn't used and we've used it for under an hour. My 13 year-old prefers his Elite Volare and it only confirmed I hate turbo trainers. Comes...

I think the following newly added snippets of code that gives the scroll by page feature is taking focus away from the mousewheel. What happens is that you're happily scrolling away, then it will just freeze, then you have to click on the page to get it to work again. I adblocked the following...

I managed to win some very tidy 700c wheels of a Specialized Tricross on fleabay I took a gamble that A) they would take a 9 speed cassette (had an 8 speed) B) they weren't too wide at the hub and especially the rim On close inspection they are only a tad wider than all my other 700c road...

My stainless steel Genesis Equilibrium 2015 needs a new wheel set Any advice? I have been recommended the following? Is it worth spending more...

Hi all i am looking to upgrade the standard wheels on my Roubaix but not sure what to go for, i am looking in the region of up to £350 so either Shimano RS500, Ultegra or Mavic Ksyrium

Rear wheel was worn so paid too much money for a new wheel including labour at my LBS. New wheel was a bottom end of the market Shimano wheel (about 70 quid), but still supposedly better than the old alex rims wheel. Since then, it has felt much harder work cycling. My average has gone down and...

I purchased a canondale before christmas and suffered from buckled wheel. My daily commute is 10 miles a few road humps. I had not ridden it since christmas after having the wheel trued. Got on it this morning after only having used it monday and tuesday noticed its buckled again after 20 miles...

New unused Token C30A Flip Flop rear wheel. SOLD. Mavic Open Sport front wheel with Tiagra hub. 700c. Excellent condition. Has had very little use as I changed to a dyno hub wheel soon after purchase. £30 DHB bike bag £25.

The Indiepac has been cancelled. Although the details why has not been made clear.

So i only just noticed this when i got back from cycling but the front wheel moves side to side, (rear wheel doesn't) The quick release lever is also loose even when closed on front wheel but it's not like the wheel come off. Anyone know why? (i've had close calls but never been in a accident...

Here's a brave lad... http://www.bbc.co.uk/news/av/world-42946685/the-adrenaline-junkie-unicycling-to-the-extreme

Has any one had any experience with building Penney farthing wheels? I am about to aquire a junior Penny (36 inch wheel)from the 1860's but apparently the large wheel has had the spokes removed,the spokes or most of them will be coming with the rest of the bike so any suggestions will be...

I was cleaning the wheels quite thoroughly this morning. I decided to check that the quick release lever & the nut on the other end, were screwed on by an equal amount along the scewer. For example, I did not want one end to only be on by a couple of threads with the risk of it coming off...

Hello all, I recently put a new screw on free wheel on an old 80's road bike ( the old broken one was taken off by welding the inner to the outer) I have now brought an ali wheel to replace the anti lock/work braking system ie: chrome coated rim. I have tried to remove the freewheel but have...

My rear wheel bearing needs tightening or possibly new ball bearings. No problems with that. However I won't be able to do it until tonight at the earliest. Safe to ride the bike before it's fixed or not? Fair bit of wobble on the wheel.

I have a Genesis Croix de Fer with Alexrims XD Elite wheels but the rear hub bearing is shot because the previous owner didn't tighten the nuts enough. Is it easy to re-lace the spokes onto a new hub or should I just buy a new wheel? If so, any ideas for something sturdy enough to ride on...

Hi all, I have a Boardman 29 er, 2015 model, which I love and fits me perfectly but I feel I could get a little better speed with a wheel upgrade. I do not have a clue where to start except the bike cost £900 I probably do not want to spend a huge fortune. Most gratefully for any advice. thanks

Hi All, I'm sure this is a subject that you knowledgeable folk have discussed many times but, please be patient with this non-knowledgeable chap and pass on your much needed (and appreciated) advice. I decided to remove my rear axle/cone from my QR wheel to correct a lateral wobble by...

As above...... preferably within 20 miles of Burton on Trent and Cheap as getting him a phone for his birthday but needs a bigger bike so doing it on a budget Anything considered if in reasonably good condition.... Whats sitting your shed/garage?

I,m running Campagnolo khamsin wheels on the winter bike. The rear has developed lateral movement. They are fitted with cartridgebearings. Am I right in thinking oversized axle can't be adjusted as traditional cup and cone type? How do I rectify this with new bearings? Which I can't fit as no...

Re-built a wheel as my rim was badly worn (calling Fnaar). What do I do with the old rim to fit it into the rubbish bag? Or just D-lock it to a lampost overnight and let the scrotes do me a favour?

I'm looking for possible causes to my Genesis Equilibrium front wheel shuddering whilst braking. It's definitely a new thing but I was on a steep downhill section and I was trying to keep the speed under strict control as there was quite a few hidden patches of thick ice, so I was probably...

Going to get my LBS to build me a new front wheel either later today or mid week (depending on how long today's last minute xmas shopping takes). When I had a chat with the guy last week he recommended either going for a Shimano 105 or a Hope hub. From what I recall the Hope hub would add...

My trusty R500s have (I think) begun to come to the end of their life, after around two years of pretty much constant use and hardly any cleaning or servicing. I'm gonna be getting a new bike in either 2018/9, but going to keep this one as my run around and been wanting to try fixed for a while...

So, just as I set off for work this morning (very late), I could hear and almost feel the rattle of ball bearings coming from the front wheel hub. It's very noticeable, and just started when I left the house this morning. I rode into work OK, with nothing wrong aside from the rattling noise -...

I've just replaced 2 spokes on my 2008 rear wheel. Unfortunately now that it is reassembled and back on the bike, the spoke cover/hub cover has been discovered lying on the workbench. How essential is this for keeping crud out of the hub? Should I disassemble and refit this now or leave it in...

I had the bike on the stand on Sunday afternoon to give it a good clean before the salt from the morning commute ate it. I took both wheels off so I wouldn't get any detergent on my disc brakes, but as I went to remove the rear wheel I realised it was seized. I got it off easy enough, and took...

Does anyone know the wheelset weight for 26 " mtb disk wheels off the subway please? Considering an upgrade but not sure if its worth it , i know i can weigh them but that involves stripping tyres, tubes, disk , cassette and tbh i dont have the time or inclination .

Been looking around for wheels. Found a cracking deal on a set similar to what I was after. They come with Ceramic bearings. How well would these stand up to using this though Winter? Are they worth the extra cash and potential handle?

hey guys/lassies my mtb has been giving me a bit of flack on its wheel hubs for a while, what size bearings should i be looking for to replace them? front wheel is really annoying me and some of the bearings have a dull couloring on spots instead of been shiny. its the old black/grey/orange...